ADB claypaky lighting fixtures for theater needs
ORKIS
Theatrical equipment
Design And Service Company
Here's Tomasz Ostrowski
+48 601 236 825
+48 22 853 58 55
02-787 Warsaw, ul. Arkadova 3
ADB CLAYPAKY
CLAYPAKY
PROLIGHT
Lighting parameters:
ORKIS PROFILE w PDF
ORKIS profile
(6 HCR COLORS)
The Orkis Profile is a device based on the innovative 6-color HCR (High Color Quality) LED technology. Orkis Profile M meets the needs of the most demanding lighting designers in the areas of dimming, color mixing, white with controlled color temperature, beam uniformity and light quality. Based on an optimized multispectral LED source, the light provided by Orkis Profile M provides a wide color gamut and a white beam with a very high CRI of 97 (up to 99), values that have never been achieved with LEDs before and are only possible in traditional halogen lamps.
The Orkis Profile M is available in two zoom ranges: 12° to 30° and 22° to 50°. Thanks to the unique "quick-mount optics" system, zoom lenses can be easily swapped in seconds. The design allows you to rotate the zoom lens 360 ° (including the aperture and gobo mask.
The Orkis Profile M is equipped with a four-frame framing system and is designed to work with 6 frames in three focus planes if necessary. Frost's unique internal variable filter ensures extremely precise, precise point adjustment and smooth cropping. It also helps to eliminate or mitigate chromatic defects at the edges of the beam without affecting its overall shape.
HCR Technology: every color, every nuance and every shade with the highest CRI.
The new HCR technology used in Orkis Profile M is an exclusive electronics co-developed by ADB and CLAYPAKY in collaboration with Osram. The LED light source consists of a module in six colors-In addition to the standard colors of red, green and blue, amber, cyan and lime were added. This unique source provides a very wide range of colors with excellent color spectrum coverage. In addition, the white light produced by HCR technology has CRI values that reach values that have never been achieved with LEDs before; A typical CRI value is 97 and can improve it to 99. These values were previously only possible with traditional halogen lamps. The Orkis Profile M is based on HCR technology, which also allows you to adjust the color temperature of white in the range from 2500K to 8000K. the entire white light range supports a high CRI.
Technical specifications
- Light source: LED HCR COB with 6 colors: Red + Green + Blue + cyan + amber + Lime-the equivalent of a 22HCR LED
- Color temperature: adjustable from 2500 K to 8000 K.
- CRI> 97 for the entire CCT (up to 99)
- Available optics: zoom 12° - 30° or zoom 22° - 50°
- The optical units can rotate freely 360°
- Zoom / focus is freely adjustable on one side in any position
- Two guides allow you to change the pivot point to adapt the installation to a wide range of different configurations and layouts.
- Up to 6 frames in 3 focal planes, with an innovative frame locking system
- Internal variable filter frost
- 16-bit ultra-smooth dimming with various dimming curves
- Control: DMX 512, RDM, WebServer and Art-Net / RDM via Art-Net
- Wireless control available
- DMX channels: 14/27
- Color management: HSV, CMY, RGB, RAW or digital filters
- Wide selection of digital reproduction filters, various colors of gel filters (emulating halogen lamps)
- Halogen mode, reproduces the behavior of a halogen lamp when dimming and adjusting CTC
- Fast, reliable locking system with one adjustable handle
- Optional accessories: Adjustable internal diffuser; Gobo holder size B; Iris
- Fully compatible with Orkis Fresnel, Klemantis HCR and Clay Paky HCR luminaires, both in terms of colorimetry and color control
- Input power: 300 VA @ 230 VAC 50 Hz
Weight and dimensions
- Weight: Housing: 9.5 kg; 12°-30° zoom lens: 7.0 kg; 22°-50° zoom lens: 6.0 kg
- Dimensions: housing with 12° - 30° zoom: 870 x 315 x 295 mm; housing with 22° – 45° zoom lens: 710 x 315 x 295 mm